SPECIFICATIONS

• Perfect Compatibility: Our gate remotes are perfectly compatible with BFT Garage Door, 2 Channels Fit for Rolling BFT Mitto 2, for BFT MITTO 2B RCB remote key
• Similar to Original Design: Suitable for BFT electric door key, elegant design, compact size and multi-user function are the main features of these remote controls
• Instruction: You must be at the control panel. (It does not need to be open).You will need at least one existing, functional, transmitter already coded on the system. 1. Press top 2 button of Existing transmitter already coded on the system for 2 seconds. 2. Press the functioning button on the front of the existing transmitter already coded on the system for 2 seconds
• Instruction: 3. Press top 2 button of New transmitter for 2 seconds. 4. Press the desired button of new transmitter for 2 seconds.(Repeat 3 & 4 for as many transmitters as are to be added to the system, but ensure there is no pause between operations to prevent time out) 5. Leave 20 Seconds before attempting to use your new transmitter(s) for the board to reset. Coding is now complete
• Package Included: 2 * BFT MITTO B2 Remote Control with 2 * batteries included. If you encounter any problems while using the product, please contact us in time. We will provide you with 7*24 hours after-sales service.

BFT MITTO Two Button Gate and Garage Door Remote Control Keyfob Transmitter(12V two-channel transmitter 433MHz rolling code)

Technical Specifications:

Frequency: 433.92MHz

Number of channels: 2

Range: 50m

Coding: Rolling code

NOTE:

Your control panel must be enabled for remote programming by the installer. If the following process does not work you will need the assistance of a BFT recommended installer.

You must be at the control panel. (It does not need to be open)

You will need at least one existing, functional, transmitter already coded on the system

The following sequence must be followed sequentially in rapid succession; any pause in the process will cause the system to time out.

Instructions:

1. Press top 2 button of Existing transmitter already coded on the system for 2 seconds

2. Press the functioning button on the front of the existing transmitter already coded on the system for 2 seconds

3. Press top 2 button of New transmitter for 2 seconds

4. Press the desired button of new transmitter for 2 seconds

Repeat 3 & 4 for as many transmitters as are to be added to the system, but ensure there is no pause between operations to prevent time out

5. Leave 20 Seconds before attempting to use your new transmitter(s) for the board to reset Coding is now complete